Start with the two systems. MoldedFit™ is the refined floor-liner range — eleven kits from a 3-piece footwell set to a 13-piece full cabin and cargo set, so you buy exactly the coverage you need. CabinProtect™ Elite is the full-cabin system, extending past the floors to footwell side walls, console sides and seat bases.

Then pick coverage. If you only need the footwells, the 3-Piece. Floors plus trunk, the 4-Piece. Add the frunk and storage trays at the 6-Piece, seat backs from the 7-Piece, door sills from the 5-Piece, and console panels at the 13-Piece.

Yes — every kit on this page is engineered for the 2025–2026 Model Y Juniper. Premium, Performance and Launch Series take any of the twelve kits. Model Y Standard (5-seat) fits the 3, 4 and 5-Piece kits, because only the frunk liner and seat back protectors differ between trims.

None of these fit the 2020–2024 previous generation or Model Y L (6/7-seat). Contact us with your VIN if you are unsure.

A single layer of 100% eco-friendly TPE — no laminate, no foam core, no coating — in both systems. One material means nothing to delaminate and nothing to trap odour between layers. PVC-free, cadmium-free, fully waterproof, genuinely odourless and recyclable. It stays flexible in freezing winters and holds its dimensions in summer heat.

For all-weather use, yes. Carpet mats absorb water, salt and odour and need extraction to clean properly. Traditional rubber mats are heavier, can smell in a hot cabin and often go stiff in the cold. Single-layer TPE is waterproof, odourless, lighter, stays flexible across the temperature range, and cleans with a hose.

The bigger difference is fit: a molded TPE liner follows the footwell geometry with raised walls and drainage channels, so spills stay contained instead of running off the edge.

Remove the liner, rinse it with water or wipe it down, let it dry, reinstall. No chemicals, no shampoo, no extraction, no drying rack. Raised perimeter walls and molded channels hold water, mud, snow, sand and spills above the carpet until you deal with them.

No tools, no trimming, no adhesive. Remove your existing mats, align to the vehicle's own retention points, press the perimeter into position. Because each liner is molded to the interior geometry there is really only one way it sits correctly. A full set takes minutes, most of which is unpacking — every kit ships flat rather than rolled, so nothing needs flattening first.

No. The molded geometry itself holds each liner in place — there is nowhere for it to travel — and anti-slip backing keeps the front liners from creeping under pedal pressure.

MoldedFit™ asks how refined a floor liner can be: one-piece molded construction, soft-touch premium TPE and a restrained low-gloss finish, in eleven coverage levels from $179.99.

CabinProtect™ Elite asks how much more of the cabin can be protected: it adds the vertical surfaces a floor liner never touches — footwell walls, console sides, seat bases — as one complete $299.99 kit.

Neither is the entry model. They answer different questions.

MoldedFit™ kits run from $179.99 for the 3-Piece footwell set to $319.99 for the 13-Piece full cabin and cargo set. CabinProtect™ Elite is $299.99. Per-piece cost drops sharply as coverage grows, so buying the coverage you want up front is cheaper than adding to it later. Free US shipping on every order.

Orders placed before 2pm ET ship the same business day from our US warehouse, with free standard shipping on every order. Most US addresses receive delivery within 3–5 business days, and tracking is emailed as soon as the label is created.

Every kit carries a Lifetime Warranty against manufacturing defects — if a liner cracks, deforms or fails under normal use we replace it, with no time limit — plus a 30-day fit guarantee: if the fit is not right, return it for a full refund. Full terms on our warranty and returns page.